Processor One or two Intel® Xeon® processors with an 800 MHz system bus.
System Memory
Capacity Four DIMM sockets for up to 8 GB of registered ECC DDR 266/333 memory (memory must be populated in pairs of equal-size DIMMs).
Type Registered ECC DDR 266/333 SDRAM 72-bit, 184-pin gold-plated DIMMs.
DIMM Sizes 8GB DDR266/333 (4 DIMMs).
Reliability Features Corrects single-bit errors, detects double-bit errors (using ECC memory), and supports Intel® Single Device Data Correction (SDDC).
Integrated Onboard
Chipset Intel® E7525 Chipset
Integrated Management Controller National* PC87431M mini-Baseboard Management Controller.
Intel® Server Network Connections One Intel® PRO/1000 Server Adapter via RJ45 connector (Intel® 82541GB controller); supports 10BASE-T, 100BASE-TX, and 1000BASE-T.
Graphics ATI* RAGE* XL SVGA PCI video controller with 8 MB of video memory.
Super I/O Controller National* PC87427
Input/Output
PCI Six slots: two PCI 33, two PCI-X 66, one PCI Express* x4, and one PCI Express x16.
Serial ATA Dual-channel SATA controller supporting RAID 0 and 1.
IDE Dual-channel EIDE for a total of four IDE devices; dual-channel SATA for a total of two SATA devices.
USB Two USB connectors (optional header for two more).
Serial Ports External DB9 serial port, internal serial header.
Floppy Controller 1.44 MB and 2.88 MB, 3-mode support.
Keyboard/Mouse Two PS/2 ports, 8240A-compatible.
Intel® Server Management
Integrated Management Type Onboard Platform Instrumentation
Software Support Microsoft Windows Server* 2003 Enterprise Edition, Microsoft Windows 2000 Advanced Server, Red Hat* Linux* Enterprise 3.0.
Fully Validated Operating Systems
Microsoft Windows Server* 2003 Enterprise Edition, Microsoft Windows 2000 Advanced Server, Microsoft Windows XP, Red Hat* Linux* Enterprise 3.0, and Novell* NetWare* 6.5.
System BIOS
Type 8Mb Flash EEPROM with AMI* BIOS, Multi-boot BBS (BIOS Boot Specification) 1.4 compliant.
Special Features Plug and Play, IDE drive auto-configure, SMBIOS 2.3, ECC/parity support, multilingual support, enabled for rolling/online BIOS updates.
Configuration Utilities Server Configuration Wizard for easy system setup of initial Intel® Server Management configuration.
Front Panel
Jumpers CMOS clear, password clear, BIOS recovery, BMC boot block write protect.
Connectors Power LED, hard-drive access LED, system-fault LED, power/sleep switch, server network connection 1 LED, reset switch, NMI switch.
Mechanical
Board Style ATX
Board Size 12" x 10.6" (305 mm x 269 mm)
Power Requirements
+5V 3.0A maximum continuous current
+5V Standby 1.6A minimum continuous current
+12V 19A maximum continuous current
5V 0.0A maximum continuous current
+3.3V ATX
-12V 0.0A maximum continuous current
Environment
Ambient Temperature1 Operating (system): 10°C to 35°C; non-operating/storage (system): 40°C to +70°C ambient.
Relative Humidity Non-operating: 95%, non-condensing at 30°C.
Safety and EMC Regulatory Compliance (Class A)
(EMC Regulatory Compliance is based on a board configured in an Intel host system in which Intel tested the board and found it compliant.)
Country and District Certification
Safety and/or EMC Regulatory Mark
Safety and/or EMC
Australia and New Zealand ACA, MED C-Tick
Canada UL / Industry Canada cURus / ICES
Europe European Directives CE
International CB Report / CISPR No legal requirements
Japan VCCI (Verification only) No legal requirements
Korea RRL MIC
Russia GOST GOST
Taiwan BSMI DOC Bsmi
United States UL / FCC (Verification only) cURus
