Processor One or two 64-bit Intel® Xeon® processor(s) an 800 MHz system bus
System Memory
Capacity Four DIMM sockets for up to 8 GB of registered ECC DDR2 400 memory (memory must be populated in pairs of equal-size DIMMs)
Type Registered ECC DDR2 400 SDRAM 72-bit, 240-pin gold plated DIMMs
Reliability Features Corrects single-bit errors, detects double-bit errors (using ECC memory), and supports Intel® Single Device Data Correction (SDDC)
Integrated Onboard
Chipset Intel® E7525 Chipset
Intel® Server Network Connections One Intel® PRO/1000 Server Network Connection via RJ45 connector (Intel® 82541GB controller); supports 10BASE-T, 100BASE-TX, and 1000BASE-T
Super I/O Controller National Semiconductor* PC87427
Graphics ATI* RAGE* XL SVGA PCI video controller with 8 MB of video memory
Integrated Storage Support
Serial ATA Dual-channel SATA controller supporting RAID 0 and 1
Input/Output
PCI Four independent PCI buses and six adapter slots: one PCI Express* x16, one PCI Express x4, two PCI-X 66MHz, and two PCI 32-bit/33MHz
IDE Single-channel EIDE for a total of two IDE devices; dual-channel SATA for a total of two SATA devices
USB Two USB connectors (optional header for two more)
Serial Ports External DB9 serial port, internal serial header
Floppy Controller 1.44 MB and 2.88 MB, 3-mode support
Keyboard/Mouse Two PS/2 ports, 8240A-compatible
Intel® Server Management
Software Support Intel® Server Management family of software
Fully Validated Operating Systems Microsoft* Windows* Server 2003 Enterprise Edition, Microsoft Windows 2000 Advanced Server, Microsoft Windows XP, Red Hat* Linux* Enterprise, SUSE* LINUX* Enterprise Server, and Novell* NetWare*
System BIOS
Type 8Mb Flash EEPROM with AMI* BIOS, Multiboot BBS (BIOS Boot Specification) 1.4-compliant
Special Features Plug and Play, IDE drive autoconfigure, SMBIOS 2.3, ECC/parity support, multilingual support, enabled for rolling/online BIOS updates
Configuration Utilities Server Configuration Wizard for easy system setup of initial Intel Server Management 8 configuration
Jumpers CMOS clear, password clear, BIOS recovery, BMC boot block write protect
Front-Panel Support Power LED, hard-drive activity LED, system- fault LED, power/sleep switch, server network connection 1 LED, reset switch, NMI switch
Mechanical
Board Style ATX
Board Size 12" x 10.6" (305 mm x 269 mm)
Power Requirements
+5V 3.0A maximum continuous current
+5V Standby 1.6A minimum continuous current
+12V 19A maximum continuous current
+3.3V 8.4A maximum continuous current
-5V 0.0A maximum continuous current
-12V 0.0A maximum continuous current
Environment
Ambient Temperature Operating (system): 10°C to 35°C; non-operating/storage (system):
-40°C to +70°C ambient
Relative Humidity Non-operating: 95%, non-condensing at 30°C
Safety and EMC Regulatory Compliance (Class A)
(EMC Regulatory Compliance is based on a board configured in an Intel host system in which Intel tested the board and found it compliant.)
Country and District Certification
Safety and/or EMC Regulatory Mark
Safety and/or EMC
Australia and New Zealand ACA, MED C-Tick
Canada UL / Industry Canada cURus / ICES
Europe European Directives CE
International CB Report / CISPR Not applicable
Japan VCCI (Verification only) Not applicable
Korea RRL MIC
Russia GOST GOST
Taiwan BSMI DOC Bsmi
United States UL / FCC (Verification only) cURus
